How to Get More Heat out of my Gas Fireplace
How to Get More Heat out of my Gas Fireplace? If your gas fireplace does not adequately heat the space, you may question if this is typical. Can these devices heat an entire room, or perhaps serve as the principal heat source for an entire house? Then why can’t yours generate this much heat? How can you resolve this issue?
Let’s examine these questions and more.
Because to their tremendous efficiency, the average gas insert or gas fireplace is capable of heating an entire room. In contrast, decorative petrol log sets often do not provide enough heat to warm the entire room.
This question’s response depends on the sort of petrol fireplace you have. Gas log sets are installed within an existing fireplace and use the chimney for ventilation. If you sit in front of it, they give the same ambiance as a fireplace with flames and warmth.
Unfortunately, the majority of the heat produced by these equipment will rise up the chimney instead of reaching the far corners of the room.
Gas inserts and fireplaces, on the other hand, are self-contained equipment that may heat a room more efficiently than gas log sets. The majority of heat generated by a petrol fireplace will be released into the room rather than up the chimney.
Each petrol fireplace comes with a BTU rating that specifies the maximum amount of heat a particular item can generate. Along with the efficiency, this value decides how much heat actually enters the dwelling.
So how much energy is required to maintain a decent temperature in your room? This depends on numerous elements that differ from residence to residence. There are numerous tools, such as BTU calculators, to assist you in determining this.
The National Association of House Builders reports that the average living, family, and bedroom sizes range from 250 to 500 square feet. Even modest petrol fireplaces should be able to adequately heat spaces of this size. There are, however, additional elements that can influence this capacity.
The ability of a petrol fireplace to heat your room depends on elements such as the insulation and climate of your property.
If your home lacks adequate insulation, the interior will be cooler, and your fireplace will have to work more to maintain a pleasant temperature. If you live in a harsh environment instead of a moderate one, you must also offer more heat.
Also, the configuration of your home, including walls and doorways, will impact how far the heat from your fireplace travels.
If your home or room is difficult to heat due to one of the aforementioned issues, you can select a fireplace with a higher BTU rating to ensure that the necessary areas are adequately heated.
How to Get the Highest Possible Heat Output From Your Gas Fireplace
If you have a petrol fireplace in your home, you probably want it to produce as much heat as possible throughout the winter. While the BTU rating and efficiency have the greatest impact on a fireplace’s ability to provide warmth, purchasing and installing a new unit can cost several thousand dollars.
There are more tools and methods for maximising the heat output of a gas fireplace, including:
- Increasing the thermostat to its highest setting
- Ensuring flue damper and fireplace are well sealed to prevent warm air from escaping
- Using a blower to spread warm air evenly throughout the room
- Converting gas fireplace to a gas insert to eliminate draught and increase efficiency
- Adding a heat exchanger to recycle the heat currently produced by your fireplace
- Installing a fireback behind a fireplace to reflect heat into the home.
If you are interested in a heat exchanger but your budget is limited, consider making one yourself! A few pieces of scrap metal and extra materials can be utilised to significantly improve the effectiveness of a gas fireplace.
