How to Pair LG Soundbar and Subwoofer

How to Pair LG Soundbar and Subwoofer.
If your television does not produce high-quality audio, a soundbar is an excellent solution. Most of the time, they come with a low-quality one, and we use a soundbar to improve the sound quality. It includes a set of high-quality speakers housed in a long rectangular enclosure.
They are specifically designed to provide stereo surround sound in small to medium-sized rooms. Unlike a television, which has speakers in a box, soundbars have speakers in all directions. They can connect to a TV, DVR, or gaming console to give you an extra boost.
A subwoofer is typically used in addition to speakers to aid in the reproduction of low-pitched audio frequencies known as bass and sub-bass. Subwoofers are designed to produce low-frequency sounds that allow other speakers to produce higher-frequency sounds.
To pair your LG Soundbar with subwoofer, simply connect all devices, including the wireless soundbar, to the power cord, and it should connect automatically. LG has simplified the process, and if you have an LG Soundbar and Subwoofer, pairing them together is not a problem. If you can’t get it to work, read the article and hopefully it will solve your problem.
LG Soundbar and Subwoofer Combination (First time setup)
You don’t need to be concerned if you’ve recently purchased a Subwoofer for your soundbar; the process is simple and won’t take more than 5 minutes. So, once you’ve assembled the television, soundbar, and subwoofer, the next step is to connect them and get them up and running. Let’s see what you’re capable of.
Connect the main Soundbar unit’s and the Wireless Subwoofer unit’s power cords to a wall outlet. Now turn on the main unit, followed by the Wireless Subwoofer unit. On the subwoofer, you will also notice an LED light blinking continuously. When you turn on the soundbar and subwoofer, they should automatically connect.
Subwoofer-equipped Soundbar
When you plug in the power cable, the subwoofer automatically activates the Bluetooth feature, and it is set to connect only with the included soundbar. When the subwoofer is successfully connected to the soundbar, the LED light will no longer blink and will now glow continuously.
If they don’t appear to work for some reason, you can try connecting them manually. You can also check the LED light; if it does not stop linking, the process has failed and the subwoofer is still attempting to connect to the soundbar. So, let’s get started on troubleshooting.
Connecting the Soundbar to the Subwoofer by Hand
Manually connecting the Soundbar to the Subwoofer requires a little more effort because there are a few extra steps to take. Simply follow our step-by-step instructions below, and you should have it up and running in no time.
The first step is to turn down the volume. If you have a model with a full display, VOL MIN will appear on the screen. A red light will appear on the soundbar if you have a different model.
The following step is to hold down the Mute button. Simply press and hold the remote’s Mute button for about 3 seconds. A WL RESET message will now appear on the screen. If you have a model that does not have a screen, the red light (from volume minimum) will blink continuously.
A pairing button can be found on the back of the subwoofer. For more than 5 seconds, press and hold the pairing button. The LED light on the subwoofer will alternately blink red and green.
Troubleshooting Soundbar Not Pairing
If you haven’t finished connecting your Soundbar to your subwoofer yet, I recommend following the troubleshooting guide and hopefully it will be fixed.
Make sure there is nothing in the way of the soundbar and subwoofer.
Turn off any other device, such as a medical device or a microwave, that uses the same frequency as the subwoofer and the soundbar.
Unplug the soundbar’s and wireless subwoofer’s power cords.
When the best soundbar under £100’s LED light stops blinking, turn both devices back on.
Finally, this time the main soundbar unit and the subwoofer unit will pair automatically. When the connection is complete, the subwoofer will display a solid green light.
Read also: How to Save a Life Piano Sheet Music With Lyrics
Conclusion
That’s all there is to it. It is very simple to connect the LG Soundbar to the Subwoofer. Simply turn both devices on and they will pair automatically, as they are designed to do. If you’ve tried everything and still can’t pair them, the last thing you can do is take them to the service centre to see if there’s a technical problem causing the problem.